Finishing sander
ENG
MAINTENANCE
Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. Always store
your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls
free of dust. If you see some sparks flashing in
the ventilation slots, this is normal and will not
damage your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling
advice.
WARRANTY STATEMENT
If your WORX product becomes defective due
to faulty materials or workmanship within the
specified warranty period of:
• 12 months from the date of purchase.
We guarantee to repair or replace all defective
parts free of charge, repair products subject
to fair wear and tear, free of charge, or at
our discretion,replace the unit free of charge
to ensure minimum inconvenience to the
customer. Your warranty is subject to the
following conditions:
• Proof of purchase date and a valid receipt is
produced.
• The product has not been misused.
• Unauthorized persons have not attempted
repairs.
• The product has not been used for hire
purposes.
• The product has not sustained damage
through foreign objects, substances or
accidents.
• Damage is not a result of fitting non-approved
accessories.
To claim the guarantee, you will need to submit
proof of purchase to the seller or an authorized
repair agent.
This warranty does not apply to accessories.
This warranty applies only to the original
purchaser and may not be transferred.
All repairs and replacement tools will be
covered by the limited warranty for the balance
of the warranty period from the date of the
original purchase.
13
12
RU-WU640-M-060726.indd 12
2006-7-26 14:00:13
Finishing Sander ENG Pag 06 Машина шлифовальная RUS Pag 15 WU640 RU-WU640-M-060726.indd 1 2006-7-26 14:00:07
RU-WU640-M-060726.indd 2 2006-7-26 14:00:07
RU-WU640-M-060726.indd 3 2006-7-26 14:00:07
� � � � � � �� � � �� � RU-WU640-M-060726.indd 4 2006-7-26 14:00:07
A B C.1 C.2 C.3 D E.1 E.2 F RU-WU640-M-060726.indd 5 2006-7-26 14:00:09
1. ON-OFF SWITCH 2. SWITCH LOCK-ON BUTTON 3. VARIABLE SPEED CONTROL DIAL 4. HAND GRIP AREA 5. BASEPLATE 6. SANDING PAPER CLAMP 7. CLAMP LEVER 8. CLAMP LEVER LOCK 9. DUST BAG 10. PAPER PUNCH 11. HOOK AND LOOP SYSTEM Finishing sander RU-WU640-M-060726.indd 6 ENG 2006-7-26 14:00:09
TECHNICAL DATA Rated voltage: Rated power: Rated no-load speed: Base plate size: Orbital dia: 220V-240V~50Hz/60Hz 260W 6,000-12,000min-1 92 x 180mm 2.4mm Double insulation: Machine weight: 1.6Kg NOISE AND VIBRATION DATA A weighted sound pressure 80dB (A) A weighted sound power 93dB (A) Wear ear
SAFETY INSTRUCTIONS WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term“power tool”in all of the warnings listed below refers to your mains-operated (corded) power tool or batteryoperated (cordless) power
that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
SYMBOLS Read the manual Warning Wear eye protection Double insulation Wear ear protection OPERATING INSTRUCTIONS 1. ON /OFF SWITCH Depress to start and release to stop your tool. 2. SWITCH LOCK-ON BUTTON Depress on/off switch (1) then lock-on button (2)(See A), release on/off switch first and lockon
the lever lock position. Press the sanding paper around the base plate shape as tight as possible and fix the end under the other sanding paper clamp. Check the sanding paper is square to the baseplate .If not correct., remove and refit it again . Always, ensure the sanding paper is tight over the
MAINTENANCE accessories. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor
DECLARATION OF CONFORMITY we, POSITEC Power Tools (Suzhou) Co., Ltd. No. 11 Yangqing Road, Loufeng Area, Suzhou Industrial Park, Jiangsu 215021, P. R. China Declare that the product, Description WORX Finishing Sander Type WU640 Complies with the following Directives, EC Machinery Directive 98/37/EC
1. ВЫКЛЮЧАТЕЛЬ ПИТАНИЯ 2. КНОПКА ФИКСАЦИИ ВЫКЛЮЧАТЕЛЯ ПИТАНИЯ 3. РЕГУЛЯТОР СКОРОСТИ 4. ОБЛАСТЬ ЗАХВАТА РУКОЙ 5. ШЛИФОВАЛЬНАЯ ПОДОШВА 6. ЗАЖИМ ШЛИФОВАЛЬНОЙ БУМАГИ 7. РЫЧАГ ЗАЖИМА 8. ФИКСАТОР РЫЧАГА ЗАЖИМА 9. МЕШОК ДЛЯ СБОРА ПЫЛИ 10. ДЫРОКОЛ 11. КРЕПЛЕНИЕ БУМАГИ «НА ЛИПУЧКЕ» 14 Машина шлифовальная
ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ Номинальное напряжение: 220V-240V~50Hz/60Hz Потребляемая мощность: Скорость без нагрузки: Размеры шлифовальной подошвы: Эксцентриситет: 260W 6,000-12,000min-1 92 x 180mm 2.4mm Двойная изоляция Вес: 1.6Kg ХАРАКТЕРИСТИКИ ШУМА И ВИБРАЦИИ Звуковое давление 80dB (A)
ИНСТРУКЦИИ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ ВНИМАНИЕ! Прочтите все инструкции. Невыполнение всех нижеприведенных инструкций может привести к поражению электрическим током, пожару и/или серьезным травмам. Термин “электроинструмент” во всех дальнейших предупреждениях относится к вашему электроинструменту,
ситуациях. е) Одевайтесь надлежащим образом. Не надевайте свободную одежду или украшения. Держите волосы, одежду и перчатки на удалении от движущихся частей. Свободную одежду, украшения или длинные волосы может затянуть в движущиеся части. ж) Используйте предусмотренные средства и устройства для
• • работы. Вы можете уменьшить воздействие этих химических веществ: Работайте в хорошо проветриваемом помещении Работайте со специальными средствами защиты, такими как респиратор, предназначенный для фильтрации микроскопических частиц. ДОПОЛНИТЕЛЬНЫЕ ПРАВИЛА ТЕХНИКИ БЕЗОПАСНОСТИ ПРИ РАБОТЕ С
УСЛОВНЫЕ ОБОЗНАЧЕНИЯ См. Руководство Предупреждение Наденьте защитные очки Двойная изоляция Наденьте защитные наушники Наденьте респиратор ЭКСПЛУАТАЦИЯ 1.ВЫКЛЮЧАТЕЛЬ ПИТАНИЯ Нажмите для включения и отпустите для выключения инструмента. 2. КНОПКА ФИКСАЦИИ ВЫКЛЮЧАТЕЛЯ ПИТАНИЯ Нажмите выключатель
на противоположной стороне шлифовальной машины. При установке нового листа шлифовальной бумаги, вставьте приблизительно 5мм одного конца шлифовальной бумаги под зажимом (см. рис. C.2). Подведите рычаг зажима и вставьте его в положение замка Обожмите шлифовальную бумагу по шлифовальной платформе
шлифования грубых поверхностей, среднюю для гладких поверхностей и бумагу для финишных работ для доводки поверхностей. В случае необходимости, сначала сделайте пробное шлифование на ненужном материале. Используйте только наждачную бумагу хорошего качества. Эффективность работы зависит от качества
ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ Мы, POSITEC Power Tools (Suzhou) Co., Ltd. No. 11 Yangqing Road, Loufeng Area, Suzhou Industrial Park, Jiangsu 215021, P. R. China Заявляем, что продукция, Марки WORX Машина шлифовальная Моделей WU640 Соответствует положениям Директив, EC директива для машин 98/37/EC EC
23 RU-WU640-M-060726.indd 23 2006-7-26 14:00:18
RU-WU640-M-060726.indd 24 2006-7-26 14:00:18