Инструкция для Hyundai H-CMD7087

General operations

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press  OPEN  button  on  the  panel  to  open  the  panel  and  press  RESET  button  to  restore  the  unit  to  the  original 

factory settings.

Power button

Press  any  button  on  the  panel  or  STANDBY  button  on  the  RC  to  turn  on  the  unit.  Press  and  hold  PWR/MUTE 

button on the panel or STANDBY button on the RC to switch the unit off.

Note: 

After  the  unit  is  off,  the  volume  level  and  radio  current  settings  will  be  memorized,  and  when  you  turn 

the unit on it will resume the stored status you set.

Volume control

Press VOL +/- buttons to adjust the volume level.

Setting the sound characteristics

Press  shortly  and  repeatedly  the  SEL  button  to  select  the  audio  setting:  VOLUME  (VOL)  =>  BASS  => 

TREBLE  (TRB)  =>  BALANCE  (BAL  L-R)  =>  FADER  (FAD  F-R).  Press  VOL  +/-  buttons  to  regulate  each 

setting.

Note:

• 

If turning off the power all the settings of each mode will be saved.

• 

If turning off the ACC power or reset the unit all the settings will become as they were set on the plant.

• 

If you not pressing VOL +/- buttons within 6 seconds after selecting the desired setting, the unit will 

automatically return to the current mode being displayed.

15