Инструкция для Hyundai H-CMD7087

Trim frame installation

To  install  the  trim  frame,  press  it  to  the  unit  body  and  push  it  to  fix  it  in  place.  This  should  be  done  before 

installing  the  front  panel;  otherwise  you  are  not  able  to  install  the  trim  frame.  When  the  trim  frame  being 

installed, the side with the groove should face down and fixed first.

2.  DIN REAR-MOUNT (Method B)

For  this  method,  use  the  screw  holes  in  the  lateral  sides  of  the  unit.  Fix  the  unit  with  the  help  of  the  factory 

radio mounting brackets.

1.  Select  a  position  in  which  the  screw  holes  of  the  brackets  (3)  are  aligned 

with  the  screw  holes  in  the  unit  body,  and  screw  in  two  screws  (2)  in  each 

side.

2.  Screw.

3. Factory radio mounting brackets.

4.  Vehicle dashboard.

5. Lock (remove this part).

Note: 

The outer trim frame and mounting sleeve are not used for method of installation.

Detaching the front panel

1.  Press OPEN button on the front panel. The panel will go down (pic. 1).

2. 

Push the panel to the right and then pull it towards you (pic. 2).

Pic. 1

Pic. 2

7